This manual describes the DESIGN 1.8.2 package for GAP. The DESIGN package is for constructing, classifying, partitioning, and studying block designs.
The DESIGN package is Copyright © Leonard H. Soicher 2003--2024. DESIGN is part of a wider project, which received EPSRC funding under grant GR/R29659/01, to provide a web-based resource for design theory; see http://designtheory.org and Dotw. The development of DESIGN was also partially supported by EPSRC grant EP/M022641/1 (CoDiMa: a Collaborative Computational Project in the area of Computational Discrete Mathematics).
DESIGN is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. For details, see https://www.gnu.org/licenses/gpl.html.
Please reference your use of the DESIGN package in a published work as follows:
L.H. Soicher, The DESIGN package for GAP, Version 1.8.2, 2024, https://gap-packages.github.io/design.
For questions, remarks, suggestions, and issues, please use the issue tracker at https://github.com/gap-packages/design/issues.
The DESIGN package is included in the standard GAP distribution. You
only need to download and install DESIGN if you need to install
the package locally or are installing an upgrade of DESIGN to
an existing installation of GAP (see the main GAP reference
section Installing a GAP Package). If you do need to download
DESIGN, you can find an archive file for the latest release at
https://github.com/gap-packages/design/releases. This archive
file can then be downloaded and unpacked in the pkg subdirectory of
an appropriate GAP root directory (see the main GAP reference section
GAP Root Directories).
The DESIGN package is written entirely in GAP code, and requires no further installation. However, DESIGN makes use of the GRAPE package Grape, which must be fully installed.
Before using DESIGN you must load the package within GAP by calling
LoadPackage("design");
A block design is an ordered pair (X,B), where X is a non-empty finite set whose elements are called points, and B is a non-empty finite multiset whose elements are called blocks, such that each block is a non-empty finite multiset of points.
DESIGN deals with arbitrary block designs. However, at present, some DESIGN functions only work for binary block designs (i.e. those with no repeated element in any block of the design), but these functions will check if an input block design is binary.
In DESIGN, a block design D is stored as a record, with mandatory
components isBlockDesign, v, and blocks. The points of a block
design D are always 1,2,...,D.v, but they may also be given names
in the optional component pointNames, with D.pointNames[i]
the name of point i. The blocks component must be a sorted list
of the blocks of D (including any repeats), with each block being a
sorted list of points (including any repeats).
A block design record may also have some optional components which store
information about the design. At present these optional components include
isSimple, isBinary, isConnected, r, blockSizes, blockNumbers,
resolutions, autGroup, autSubgroup, tSubsetStructure,
allTDesignLambdas, efficiency, id, statistical_propertiesXML,
and pointNames.
A non-expert user should only use functions in the DESIGN package to create block design records and their components.
To give you an idea of the capabilities of this package, we now give an extended example of an application of the DESIGN package, in which a nearly resolvable non-simple 2-(21,4,3) design is constructed (for Donald Preece) via a pairwise-balanced design. All the DESIGN functions used here are described in this manual.
The program first discovers the unique (up to isomorphism) pairwise-balanced 2-(21,{4,5},1) design D invariant under H=langle (1,2,...,20)rangle, and then applies the *-construction of McSo to this design D to obtain a non-simple 2-(21,4,3) design Dstar with automorphism group of order 80. The program then classifies the near-resolutions of Dstar invariant under the subgroup of order 5 of H, and finds exactly two such (up to the action of Aut(Dstar)). Finally, Dstar is printed.
Further extended examples of the use of the DESIGN package can be found in Soi13 and Soi24.
gap> H:=CyclicGroup(IsPermGroup,20);
Group([ (1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20) ])
gap> D:=BlockDesigns(rec(v:=21,blockSizes:=[4,5],
> tSubsetStructure:=rec(t:=2,lambdas:=[1]),
> requiredAutSubgroup:=H ));;
gap> Length(D);
1
gap> D:=D[1];;
gap> BlockSizes(D);
[ 4, 5 ]
gap> BlockNumbers(D);
[ 20, 9 ]
gap> Size(AutGroupBlockDesign(D));
80
gap> Dstar:=TDesignFromTBD(D,2,4);;
gap> AllTDesignLambdas(Dstar);
[ 105, 20, 3 ]
gap> IsSimpleBlockDesign(Dstar);
false
gap> Size(AutGroupBlockDesign(Dstar));
80
gap> near_resolutions:=PartitionsIntoBlockDesigns(rec(
> blockDesign:=Dstar,
> v:=21,blockSizes:=[4],
> tSubsetStructure:=rec(t:=0,lambdas:=[5]),
> blockIntersectionNumbers:=[[ [0] ]],
> requiredAutSubgroup:=SylowSubgroup(H,5) ));;
gap> Length(near_resolutions);
2
gap> List(near_resolutions,x->Size(x.autGroup));
[ 5, 20 ]
gap> Print(Dstar,"\n");
rec(
isBlockDesign := true,
v := 21,
blocks := [ [ 1, 2, 4, 15 ], [ 1, 2, 4, 15 ], [ 1, 2, 4, 15 ],
[ 1, 3, 14, 20 ], [ 1, 3, 14, 20 ], [ 1, 3, 14, 20 ], [ 1, 5, 9, 13 ],
[ 1, 5, 9, 17 ], [ 1, 5, 13, 17 ], [ 1, 6, 11, 16 ], [ 1, 6, 11, 21 ],
[ 1, 6, 16, 21 ], [ 1, 7, 8, 10 ], [ 1, 7, 8, 10 ], [ 1, 7, 8, 10 ],
[ 1, 9, 13, 17 ], [ 1, 11, 16, 21 ], [ 1, 12, 18, 19 ],
[ 1, 12, 18, 19 ], [ 1, 12, 18, 19 ], [ 2, 3, 5, 16 ], [ 2, 3, 5, 16 ],
[ 2, 3, 5, 16 ], [ 2, 6, 10, 14 ], [ 2, 6, 10, 18 ], [ 2, 6, 14, 18 ],
[ 2, 7, 12, 17 ], [ 2, 7, 12, 21 ], [ 2, 7, 17, 21 ], [ 2, 8, 9, 11 ],
[ 2, 8, 9, 11 ], [ 2, 8, 9, 11 ], [ 2, 10, 14, 18 ], [ 2, 12, 17, 21 ],
[ 2, 13, 19, 20 ], [ 2, 13, 19, 20 ], [ 2, 13, 19, 20 ],
[ 3, 4, 6, 17 ], [ 3, 4, 6, 17 ], [ 3, 4, 6, 17 ], [ 3, 7, 11, 15 ],
[ 3, 7, 11, 19 ], [ 3, 7, 15, 19 ], [ 3, 8, 13, 18 ], [ 3, 8, 13, 21 ],
[ 3, 8, 18, 21 ], [ 3, 9, 10, 12 ], [ 3, 9, 10, 12 ], [ 3, 9, 10, 12 ],
[ 3, 11, 15, 19 ], [ 3, 13, 18, 21 ], [ 4, 5, 7, 18 ], [ 4, 5, 7, 18 ],
[ 4, 5, 7, 18 ], [ 4, 8, 12, 16 ], [ 4, 8, 12, 20 ], [ 4, 8, 16, 20 ],
[ 4, 9, 14, 19 ], [ 4, 9, 14, 21 ], [ 4, 9, 19, 21 ], [ 4, 10, 11, 13 ],
[ 4, 10, 11, 13 ], [ 4, 10, 11, 13 ], [ 4, 12, 16, 20 ],
[ 4, 14, 19, 21 ], [ 5, 6, 8, 19 ], [ 5, 6, 8, 19 ], [ 5, 6, 8, 19 ],
[ 5, 9, 13, 17 ], [ 5, 10, 15, 20 ], [ 5, 10, 15, 21 ],
[ 5, 10, 20, 21 ], [ 5, 11, 12, 14 ], [ 5, 11, 12, 14 ],
[ 5, 11, 12, 14 ], [ 5, 15, 20, 21 ], [ 6, 7, 9, 20 ], [ 6, 7, 9, 20 ],
[ 6, 7, 9, 20 ], [ 6, 10, 14, 18 ], [ 6, 11, 16, 21 ],
[ 6, 12, 13, 15 ], [ 6, 12, 13, 15 ], [ 6, 12, 13, 15 ],
[ 7, 11, 15, 19 ], [ 7, 12, 17, 21 ], [ 7, 13, 14, 16 ],
[ 7, 13, 14, 16 ], [ 7, 13, 14, 16 ], [ 8, 12, 16, 20 ],
[ 8, 13, 18, 21 ], [ 8, 14, 15, 17 ], [ 8, 14, 15, 17 ],
[ 8, 14, 15, 17 ], [ 9, 14, 19, 21 ], [ 9, 15, 16, 18 ],
[ 9, 15, 16, 18 ], [ 9, 15, 16, 18 ], [ 10, 15, 20, 21 ],
[ 10, 16, 17, 19 ], [ 10, 16, 17, 19 ], [ 10, 16, 17, 19 ],
[ 11, 17, 18, 20 ], [ 11, 17, 18, 20 ], [ 11, 17, 18, 20 ] ],
autGroup := Group( [ ( 2,14,10,18)( 3, 7,19,15)( 4,20, 8,12)( 5,13,17, 9),
( 1,17, 5, 9)( 2,10,14, 6)( 4,16,12,20)( 7,15,19,11),
( 1,18,19,12)( 2,11, 8, 9)( 3, 4,17, 6)( 5,10,15,20)( 7,16,13,14) ] ),
blockSizes := [ 4 ],
isBinary := true,
allTDesignLambdas := [ 105, 20, 3 ],
isSimple := false )
design manual