The AutomGrp package provides methods for computation with groups and
semigroups generated by finite automata or given by wreath recursions, as well
as with their finitely generated subgroups, subsemigroups and elements.
The project originally started in 2000 mostly for personal use. It was gradually expanding during consequent years, including both addition of new algorithms and simplification of user interface. It was used in the process of classification of groups generated by 3-state automata over a 2-letter alphabet (see BGK32), as well as many subsequent papers.
First author thanks Sveta and Max Muntyan for their infinite patience and understanding. Second author thanks Olga, Anna, Irina and Andrey Savchuk for their help and understanding. This project would be impossible without them.
We would like to express our warm gratitude to Rostislav Grigorchuk, Zoran Sunic, Volodymyr Nekrashevych, Ievgen Bondarenko, Rostyslav Kravchenko, Yaroslav and Maria Vorobets and Ben Steinberg for their support, valuable comments, feature requests and constant interest in the project.
We also appreciate the code provided by Andrey Russev that was used to optimize the minimization of autmata function. Last, but not the least, we want to thank the anonymous referee for a very detailed review and numeruous constructive comments that significantly increased the quality of the accepted version of the package.
Both authors were partially supported by NSF grants DMS-0600975, DMS-0456185 and DMS-0308985. The second author appreciates the support from the New Researcher Grant from University of South Florida and the Simons Collaboration Grant from Simons Foundation.
This package deals mostly with groups acting on rooted trees. In this section we recall necessary definitions and notation that will be used throughout the manual. For more detailed introduction to the theory of groups generated by automata we refer the reader to GNS00.
The infinite connected tree with selected vertex, called the root, in which the degree of every vertex except the root is d+1 and the degree of the root is d is called the regular homogeneous rooted tree of degree d (or d-ary tree). The rooted tree of degree 2 is called the binary tree.
The n-th level of the tree consists of all vertices located at distance n from the root (here we mean combinatorial distance in the graph).
Similarly one defines spherically homogeneous (or spherically-transitive) rooted trees as rooted trees, such that the degrees of all vertices at each level coincide (but may depend on the level).
Given a finite alphabet X={1,2,…,d} the set X* of all finite words over X may be endowed with the structure of a d-ary tree in which the empty word ∅ is the root, the level n in X* consists of the words of length n over X and every vertex v has d children, labeled by vx, for x ∈ X.
Any automorphism f of a rooted tree T fixes the root and the levels. For any vertex v of the tree T each automorphism f induces the automorphism f|v of the subtree of T hanging down from the vertex v by f|v(u)=w if f(vu)=v′w for some v′ ∈ X|v| from the same level as v (here |v| denotes the combinatorial distance from v to the root of the tree). This automorphism is called the section of f at v.
If the tree T is regular, then the subtrees hanging down from vertices of T are canonically isomorphic to T and, thus, the sections of any automorphism f of T can be considered as automorphisms of T again.
A group G of automorphisms of a regular rooted tree T is called self-similar if all sections of every element of G belong to G.
A self-similar group G is called contracting if there is a finite set N of elements of G, such that for any g in G there is a level n such that all sections of g at vertices of levels bigger than n belong to N. The smallest set with such a property is called the nucleus of G.
Any automorphism f of a rooted tree can be decomposed as
|
where f1,…,fd are the sections of f at the vertices of the first level and σ is the permutation which permutes the subtrees hanging down from these vertices.
This notation is very convenient for performing multiplication of elements. Throughout this manual and everywhere in the package we use the right action of (semi)groups acting on trees and for automorphisms (homomorphisms) of a tree f and g, the composition f·g means that f acts first. This is consistent with the order of multiplication of permutations in GAP , even though some authors in the field prefer to use the left action. With this convention in mind, If f=(f1,f2,…,fd)σ and g=(g1,g2,…,gd)π, then
|
|
The group of automorphisms of a rooted tree is said to be level-transitive if it acts transitively on each level of the tree.
Everything above applies also for homomorphisms of rooted trees (maps preserving the root and incidence relation of the vertices). The only difference is that in this case we get semigroups and monoids of tree homomorphisms.
A special class of self-similar groups is the class of groups generated by finite automata. This class is especially nice from the algorithmic point of view. Let us recall basic definitions.
A Mealy automaton (transducer, synchronous automaton, or, simply, automaton) is a tuple A=(Q,X,ρ,τ), where Q is a set of states, X is a finite alphabet of cardinality d ≥ 2, ρ:Q ×X → X is a map, called the output map, τ:Q ×X → Q is a map, called the transition map.
If for each state q in Q, the restriction ρq: X → X given by ρq(x)=ρ(q,x) is a permutation, the automaton is called invertible.
If the set Q of states is finite, the automaton is called finite.
If some state q in Q of the automaton A is selected to be initial, the automaton is called initial and denoted Aq. If an initial state is not specified, the automaton is called noninitial.
An initial automaton naturally acts on X* by homomorphisms (automorphisms in the case of an invertible automation) in the following way. Given a word x1x2…xn, the automaton starts at the initial state q, reads the first input letter x1, outputs the letter ρq(x1) and changes its state to q1=τ(q,x1). The rest of the input word is handled by the new state q1 in the same way. Formally speaking, the functions ρ and τ can be extended to ρ:Q ×X* → X* and τ:Q ×X* → Q.
Given an automaton A the group G(A) of automorphisms of X* generated by all the states of A (as initial automata) is called the automaton group defined by A.
Every automaton group is self-similar, because the section of Aq at vertex v is just Aτ(q,v).
A special case is the case of groups generated by finite automata and their subgroups. In this class we can solve the word problem, which makes it much nicer from the computational point of view.
Finite automata are often described by recursive relations (or wreath recursion) of the form
|
for every state q. For example, the line a=(a,b)(1,2), b=(a,b) describes the automaton with 2 states a and b, such that a permutes the letters 1 and 2 of the alphabet X={1,2} and b does not; and, independently of the current state, the automaton changes its initial state to a if it reads 1 and to b if it reads 2. This particular automaton generates the, so-called, lamplighter group.
Semigroups generated by noninvertible automata are defined in a similar way.
AutomGrp package requires GAP version at least 4.4.6 and FGA (Free
Group Algorithms) package available at http://www.gap-system.org/Packages/fga.html
The installation of the AutomGrp package follows the standard GAP rules, i.e.
to install it unpack the archive into the pkg directory of
your GAP distribution. This will create automgrp subdirectory.
To load package issue the command
gap> LoadPackage("automgrp");
----------------------------------------------------------------
Loading AutomGrp 1.3 (Automata Groups and Semigroups)
by Yevgen Muntyan (muntyan@fastmail.fm)
Dmytro Savchuk (http://savchuk.myweb.usf.edu/)
Homepage: https://gap-packages.github.io/automgrp/
----------------------------------------------------------------
true
Note, that if the FR package by Laurent Bartholdi is installed as well, GAP
will automatically load it, together with the packages on which it depends. The FR
package functionality partially overlaps with the one of AutomGrp. For the
user's convenience and to expand the functionality of both packages, several converters (see operations AutomGrp2FR (AutomGrp2FR)
and FR2AutomGrp (FR2AutomGrp)) of the basic data types were implemented in AutomGrp.
To test the installation, issue the command
gap> Read( Filename( DirectoriesPackageLibrary( "automgrp", "tst" ), "testall.g"));in the GAP command line.
Here is how to define the Grigorchuk group and Basilica group.
gap> Grigorchuk_Group := AutomatonGroup("a=(1,1)(1,2),b=(a,c),c=(a,d),d=(1,b)");
< a, b, c, d >
gap> Basilica := AutomatonGroup( "u=(v,1)(1,2), v=(u,1)" );
< u, v >
Similarly one can define a group (or semigroup) generated by a noninvertible automaton. As an example we consider the semigroup of intermediate growth generated by the two state automaton (BRS06)
gap> SG := AutomatonSemigroup( "f0=(f0,f0)(1,2), f1=(f1,f0)[2,2]" ); < f0, f1 >
Another type of groups (semigroups) implemented in the package is the class of groups (semigroups) defined by wreath recursion (finitely generated self-similar groups).
gap> WRG := SelfSimilarGroup("x=(1,y)(1,2),y=(z^-1,1)(1,2),z=(1,x*y)");
< x, y, z >
Now we can compute several properties of Grigorchuk_Group, Basilica and SG
gap> IsFinite(Grigorchuk_Group); false gap> IsSphericallyTransitive(Grigorchuk_Group); true gap> IsFractal(Grigorchuk_Group); true gap> IsAbelian(Grigorchuk_Group); false gap> IsTransitiveOnLevel(Grigorchuk_Group, 4); true
We can also check that Basilica and WRG are contracting and compute their nuclei
gap> IsContracting(Basilica); true gap> GroupNucleus(Basilica); [ 1, u, v, u^-1, v^-1, u^-1*v, v^-1*u ] gap> IsContracting( WRG ); true gap> GroupNucleus( WRG ); [ 1, y*z^-1*x*y, z^-1*y^-1*x^-1*y*z^-1, z^-1*y^-1*x^-1, y^-1*x^-1*z*y^-1, z*y^-1*x*y*z, x*y*z ]
The group Grigorchuk_Group is generated by a bounded automaton and, thus, is
amenable (see BKNV05)
gap> IsGeneratedByBoundedAutomaton(Grigorchuk_Group); true gap> IsAmenable(Grigorchuk_Group); true
We can compute the stabilizers of levels and vertices
gap> StabilizerOfLevel(Grigorchuk_Group, 2); < a*b*a*d*a^-1*b^-1*a^-1, d, b*a*d*a^-1*b^-1, a*b*c*a^-1, b*a*b*a*b^-1*a^-1*b^ -1*a^-1, a*b*a*b*a*b^-1*a^-1*b^-1 > gap> StabilizerOfVertex(Grigorchuk_Group, [2, 1]); < a*b*a*d*a^-1*b^-1*a^-1, d, a*c*b^-1*a^-1, c, b, a*b*a*c*a^-1*b^-1*a^ -1, a*b*a*b*a^-1*b^-1*a^-1 >
In the case of a finite group we can produce an isomorphism into a permutation group
gap> f := IsomorphismPermGroup(Group(a,b));
[ a, b ] ->
[ (1,2)(3,5)(4,6)(7,9)(8,10)(11,13)(12,14)(15,17)(16,18)(19,21)(20,22)(23,
25)(24,26)(27,29)(28,30)(31,32), (1,3)(2,4)(5,7)(6,8)(9,11)(10,12)(13,
15)(14,16)(17,19)(18,20)(21,23)(22,24)(25,27)(26,28)(29,31)(30,32) ]
gap> Size(Image(f));
32
Here is how to find relations in Basilica between elements of length not greater than 5.
gap> FindGroupRelations(Basilica, 6); v*u*v*u^-1*v^-1*u*v^-1*u^-1 v*u^2*v^-1*u^2*v*u^-2*v^-1*u^-2 v^2*u*v^2*u^-1*v^-2*u*v^-2*u^-1 [ v*u*v*u^-1*v^-1*u*v^-1*u^-1, v*u^2*v^-1*u^2*v*u^-2*v^-1*u^-2, v^2*u*v^2*u^-1*v^-2*u*v^-2*u^-1 ]
Or relations in the subgroup 〈p=uv−1, q=vu〉
gap> FindGroupRelations([u*v^-1,v*u], ["p", "q"], 5); q*p^2*q*p^-1*q^-2*p^-1 [ q*p^2*q*p^-1*q^-2*p^-1 ]
Or relations in the semigroup SG
gap> FindSemigroupRelations(SG, 4); f0^3 = f0 f0^2*f1 = f1 f1*f0^2 = f1 f1^3 = f1 [ [ f0^3, f0 ], [ f0^2*f1, f1 ], [ f1*f0^2, f1 ], [ f1^3, f1 ] ]
Some basic operations with elements are the following:
The function IsOne computes whether an element represents the
trivial automorphism of the tree
gap> IsOne( (a*b)^16 ); true
Here is how to compute the order (this function might not stop in some cases)
gap> Order(a*b); 16 gap> Order(u^22*v^-15*u^2*v*u^10); infinity
Note that the package contains many helpful notifications that can be enabled
by changing InfoLevel for InfoAutomGrp. In many situations level 3 provides
additional information about the computation that can be used either to track the
progress or to extract the proof from the result as it can be done in the example
below.
gap> SetInfoLevel(InfoAutomGrp,3);
gap> Order(u^22*v^-15*u^2*v*u^10);
#I v is obtained from (u^22*v^-15*u^2*v*u^10)^1
by taking sections and cyclic reductions at vertex [ 1, 1, 1, 1, 1, 1, 1, 1, 1 ]
#I v is obtained from (v)^2
by taking sections and cyclic reductions at vertex [ 1, 1 ]
infinity
One can check if a particular element acts spherically transitively on the tree (this function might not stop in some cases)
gap> IsSphericallyTransitive(a*b); false gap> IsSphericallyTransitive(u*v); true
The sections of an element can be obtained as follows
gap> Section(u*v^2*u, 2); u^2*v gap> Decompose(u*v^2*u); (v, u^2*v) gap> Decompose(u*v^2*u, 3); (v, 1, 1, 1, u*v, 1, u, 1)(1,2)(5,6)
One can try to compute whether the elements of group WRG defined
by wreath recursion are finite-state and calculate corresponding
automaton
gap> IsFiniteState(x*y^-1); true gap> AllSections(x*y^-1); [ x*y^-1, z, 1, x*y, y*z^-1, z^-1*y^-1*x^-1, y^-1*x^-1*z*y^-1, z*y^-1*x*y*z, y*z^-1*x*y, z^-1*y^-1*x^-1*y*z^-1, x*y*z, y, z^-1, y^-1*x^-1, z*y^-1 ] gap> A := MealyAutomaton(x*y^-1); <automaton> gap> NumberOfStates(A); 15
To get the action of an element on a vertex or on a particular level of the tree use the following commands
gap> [1,2,1,1]^(a*b); [ 2, 2, 1, 1 ] gap> PermOnLevel(u*v^2*v, 3); (1,6,4,8,2,5,3,7)
The action of the whole group Grigorchuk_Group on some level can be computed via
PermGroupOnLevel (see PermGroupOnLevel).
gap> PermGroupOnLevel(Grigorchuk_Group, 3); Group([ (1,5)(2,6)(3,7)(4,8), (1,3)(2,4)(5,6), (1,3)(2,4), (5,6) ]) gap> Size(last); 128
The next example shows how to find all elements of length at most 5 of order 16 in the Grigorchuk group.
gap> FindElements(Grigorchuk_Group, Order, 16, 5); [ a*b, b*a, c*a*d, d*a*c, a*b*a*d, a*c*a*d, a*d*a*b, a*d*a*c, b*a*d*a, c*a*d*a, d*a*b*a, d*a*c*a, a*c*a*d*a, a*d*a*c*a, b*a*b*a*c, b*a*c*a*c, c*a*b*a*b, c*a*c*a*b ]
automgrp manual