[Up] [Previous] [Next] [Index]

3 Installing XGAP

Sections

  1. Overview
  2. What you need to install XGAP
  3. Getting and unpacking the sources
  4. Configuring and Compiling the C part
  5. Installing the Startup Script
  6. Installing in a different than the standard location

Installing XGAP should be easy once you have installed GAP itself. We assume here that you want to install XGAP in its standard location, which is in the ``pkg'' subdirectory of the main GAP4 installation.

3.1 Overview

You have to perform the following steps to install XGAP:

--
Get the sources
--
Unpack the sources
--
Use the configure script to adjust everything to your specific system
--
Compile the C part of XGAP
--
Edit a certain startup script (if necessary) and install it in an executable location in your system

3.2 What you need to install XGAP

Being a graphical user interface to GAP, XGAP of course needs graphics. At the moment this means that you need the X window system in the Version 11 Release 5 or newer. On the other hand the type of Unix you use should not matter. Please file an issue report on

https://github.com/gap-packages/xgap/issues
if you encounter problems with certain system configurations. Note that usage on a computer running Microsoft Windows is not officially supported. See the file xgap/README.Windows for a report how it could still work on Windows.

Because XGAP contains a C-part you need a C compiler.

3.3 Getting and unpacking the sources

In most cases, the XGAP package will already be included in the main distribution. However, you can also download the sources of the latest version from

https://gap-packages.github.io/xgap/

You need only one file with the name ``xgap-4.32.tar.gz'' which is in the subdirectory for the packages. You now change your current directory to the pkg subdirectory of the location where you installed GAP Now you extract the sources for the XGAP package:

# tar xzvf xgap-4.32.tar.gz
...

The tar utility unpacks the files and stores them into the appropriate subdirectories. XGAP resides completely in the following subdirectory (assuming standard location):

gap4r8/pkg/xgap

3.4 Configuring and Compiling the C part

You have to change your current working directory to the ``xgap'' subdirectory. You do this by

# cd xgap

if your current working directory is the one, where you used tar. There you invoke the configure script by:

# ./configure
creating cache ./config.cache
checking for make... make
checking build system type... x86_64-unknown-linux-gnu
checking host system type... x86_64-unknown-linux-gnu
checking target system type... x86_64-unknown-linux-gnu
checking for gcc... gcc
checking whether the C compiler (gcc  ) works... yes
checking whether the C compiler (gcc  ) is a cross-compiler... no
checking whether we are using GNU C... yes
...
updating cache ./config.cache
creating ./config.status
creating Makefile
creating xgap.sh

… indicate omissions. This script tries to determine, which kind of operating system and libraries you have installed and configures the source accordingly. Normally this should produce some output but no error messages.

Note that you can add ``CONFIGNAME=default64'' after the ./configure command (with ``default64'' replaced by a configuration name you used to compile GAP with) to compile for a different than the standard configuration.

The last step of the script produces some makefiles which are used to compile the code. You do this by typing

# make
mkdir -p bin/x86_64-unknown-linux-gnu-gcc
cp cnf/configure.out bin/x86_64-unknown-linux-gnu-gcc/configure
( cd bin/x86_64-unknown-linux-gnu-gcc ; CC=gcc ./configure  )
checking for gcc... gcc
checking whether the C compiler works... yes
...
creating ./config.status
creating Makefile
creating config.h
( cd bin/x86_64-unknown-linux-gnu-gcc ; make CC=gcc )
make[1]: Entering directory 
`/scratch/neunhoef/4.0/pkg/xgap/bin/x86_64-unknown-linux-gnu-gcc'
gcc -I. -g -O2   -o xcmds.o -c ../../src.x11/xcmds.c
...
make[1]: Leaving directory \                    # line broken for this manual!
     `/usr/local/lib/gap4/pkg/xgap/bin/i686-unknown-linux2.0.34-gcc'

(a few lines were broken for typesetting purposes in this manual, the position is marked by a backslash)

Now all C sources are compiled and a binary executable is built. It is stored in a subdirectory of the ``bin'' subdirectory in your ``xgap'' directory. The name of this location has something to do with your installation. It could for example be

bin/x86_64-unknown-linux-gnu-gcc/xgap

if you compile on a 64-bit Linux system using the GNU-C-Compiler.

3.5 Installing the Startup Script

To make the startup of XGAP more convenient there is a startup script which contains also some configuration information like the position of your GAP installation. It is in the ``xgap'' directory and is called ``xgap.sh''. This file is automatically generated by the configure script and normally you should not have to change anything in it. Just copy it to some location that people have in their ``PATH'' environment variable, for example to ``/usr/local/bin''. This completes the installation.

If you want to change anything in the installation, you can also edit the script until the line

##  STOP EDITING HERE !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

You can specify the directory where GAP is installed (``GAP_DIR''), the amount of memory that GAP should use as initial workspace (``GAP_MEM''), the name of the GAP-executable (``GAP_PRG'') and the name of the XGAP-executable (``XGAP_PRG''). The first three are exactly the same things that you could edit in the main GAP startup script. After that you have the possibility to control the behaviour of the XGAP startup script. You can specify whether XGAP goes into the background (``DAEMON'') and whether it prints out information about its parameters (``VERBOSE''). Note that it is possible to combine ``DAEMON=YES'' and ``VERBOSE=YES'' because the script actually runs in the foreground and only the C program is put into the background.

3.6 Installing in a different than the standard location

It could happen that you do not want to install XGAP in its standard location, perhaps because you do not want to bother your system administrator and have no access to the GAP directory. In this case you can unpack XGAP in any other location within a ``pkg'' directory with the tar command as described above. Let us call this directory ``pkg'' for the moment. You get an ``xgap'' subdirectory with all the files of XGAP in it. You follow the standard procedure with one exception:

In the ``./configure'' command, add the following option:

./configure --with-gaproot=/usr/local/lib/gap4r8

if /usr/local/lib/gap4r8 is the location of the main GAP installation. You can find out where the main GAP4 installation is by starting GAP as usual and looking at the variable GAPInfo.RootPaths within GAP.

[Up] [Previous] [Next] [Index]

XGAP manual
February 2024